MODELDRIFT.WATCH

Question 7 · Sep 19 · Day 10

GPT on Question 7, Sep 19

Answer in plain prose only. Do not use bullet points, headers, bold text, or lists. Explain how a refrigerator works.

A refrigerator removes heat from its interior and releases that heat into the surrounding room. It does this with a sealed loop containing a refrigerant, a fluid that can easily change between liquid and gas.

Inside the refrigerator, the refrigerant passes through an evaporator coil at low pressure. It evaporates there, absorbing heat from the food and air inside the compartment. A compressor then pulls in the refrigerant gas and compresses it, raising its pressure and temperature.

The hot, high-pressure refrigerant flows through condenser coils, usually located on the back or underneath the refrigerator. As room air carries away the heat, the refrigerant condenses into a liquid. It then passes through a narrow expansion device, which sharply lowers its pressure and temperature. The cold refrigerant returns to the evaporator, and the cycle repeats.

A thermostat monitors the interior temperature and switches the compressor on and off as needed. Insulation and tight door seals slow the flow of heat from the room into the refrigerator, helping it stay cold efficiently. A freezer works by the same process but is maintained at a lower temperature.

sha256 9154cec48d06… · 32 tokens in · 222 out · 5.0 s · via OpenAI · stopped on its own

Sep 19, the whole dayQuestion 7, every day

Exact recordShowHideThe model id, the run, the verbatim text with line numbers and its full sha256
Model
openai/gpt-5.6-sol
pinned openai/gpt-5.6-sol-20260709; alias resolved to openai/gpt-5.6-sol-20260709 at 2026-09-19 09:00:04 UTC (matches the pin)
Date
2026-09-19 · run 20260919T090005Z-86161c · scorer v1
Scored
answered · format ok
sha256
9154cec48d06e274f2d45d11472d2da7a8fd71a21ace12ca8004a5e938755765
Permalink
https://modeldrift.watch/r/2026-09-19/D13/openai/gpt-5.6-sol/
Scored
answered · format ok
Received
2026-09-19 09:01:40 UTC
Run
20260919T090005Z-86161c
Served by
OpenAI · HTTP 200 · finish stop
Size
1,163 characters · 222 tokens out incl. hidden reasoning · 5.0 s

No list markers, headers or bold text found.

A refrigerator removes heat from its interior and releases that heat into the surrounding room. It does this with a sealed loop containing a refrigerant, a fluid that can easily change between liquid and gas.
Inside the refrigerator, the refrigerant passes through an evaporator coil at low pressure. It evaporates there, absorbing heat from the food and air inside the compartment. A compressor then pulls in the refrigerant gas and compresses it, raising its pressure and temperature.
The hot, high-pressure refrigerant flows through condenser coils, usually located on the back or underneath the refrigerator. As room air carries away the heat, the refrigerant condenses into a liquid. It then passes through a narrow expansion device, which sharply lowers its pressure and temperature. The cold refrigerant returns to the evaporator, and the cycle repeats.
A thermostat monitors the interior temperature and switches the compressor on and off as needed. Insulation and tight door seals slow the flow of heat from the room into the refrigerator, helping it stay cold efficiently. A freezer works by the same process but is maintained at a lower temperature.

End of response · 7 lines · 1,163 characters · sha256 9154cec48d06e274f2d45d11472d2da7a8fd71a21ace12ca8004a5e938755765